Heat Exchanger Enamels
• Highly resistant to sulfuric acid and water vapor.
• Enamel coating is hard as required by its areas of use.
• It is typically preferred in color blue.
• Applicable as powder or wet.
• Coating is made with an average thickness of 170 microns
HEXTECHNOLOGY |
|
|---|---|
| Application Method |
Spray / Electrostatic Powder |
| Number of Coats | 1 coat |
| Thickness |
170-220 μm |
| Impact Resistance |
1-2/5 |
| Acid Resistance |
OK |
| ETC Resistance |
Optional |
| Certification | Reach, Rohs |
• Used in heat exchangers in natural gas, coal fuel oil and power plants.
• Resistant to sulfuric acid.
• Typically blue due to high content of cobalt.